Reverse Osmosis (RO) System First Operation

Perform this before operating the system for the first time, after a long time of storage or when there is air inside the RO system

1. Connect the RO system to a water supply

2. Open the water tap for 7 minutes

3. Connect the RO system to power

4. Make sure the knob on the RO system is in parallel position

   

5. Turn on the RO pump

6. Let the RO system works for about 3 minutes

7. Turn the knob is in perpendicular position

   

8. Wait one more minute 

9. Take a water sample from the filtered water 

10. Measure the Total Dissolved Solids (TDS) of the sample with the TDS meter. If the result is 0 ppm - Water is purified and you are ready to work